Supermicro SUPERSERVER 8016B-TLF, Руководство пользователя

Страница: 49 / 108

Chapter 5: Advanced Serverboard Setup
5-17
Wake-On-Ring
The Wake-On-Ring header is des-
ignated JWOR. This function allows
your computer to receive and be
"awakened" by an incoming call when
in the suspend state. See the table on
the right for pin defi nitions. You must
also have a WOR card and cable to
use this feature.
Wake-On-Ring
Pin Defi nitions
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Serial Ports
The COM1 serial port is located on the
I/O backpanel. COM2 is a header on
the serverboard. See the table on the
right for pin defi nitions.
Serial Port Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
Power LED/Speaker
On JD1 header, pins 1-3 are for a
power LED and pins 4-7 are for the
speaker. Pins 4-7 are available for
connection to an external speaker. If
you wish to use the onboard speaker,
please close pins 6-7. See the table
on the right for speaker pin defi ni-
tions.
Speaker Connector
Pin Settings
Pin Setting Defi nition
Pins 4-7 External Speaker
Pins 6-7 Onboard Speaker
PWR LED Connector
Pin Defi nitions
Pin Setting Defi nition
Pin 1 Anode (+)
Pin2 Cathode (-)
Pin3 NA
LPCI Port 80
An LPCI (Low-Profi le PCI) Port 80
header is located at JLPC1 to provide
Port 80 connection. Use this header
to enhance system performance and
data security. See the table on the
right for pin defi nitions.
LPCI Port 80 Header
Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK4 14 SMB_DAT4
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)