Supermicro SUPERSERVER 8016B-TLF Скачать руководство пользователя страница 90

Страница: 90 / 108

7-20

UPER

ERVER 8016B-TLF User's Manual

Advanced ACPI Confi guration

This feature allows the user to confi gure Advanced ACPI (Advanced Confi guration

and Power Interface) settings.

ACPI Version Features

Use this feature to select the ACPI version to be used in the system. The options

are ACPI v1.0,

ACPI v2.0

and ACPI v3.0. Please refer to ACPI's website for further

explanation: http://www.acpi.info/.

ACPI APIC Support

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

AMI OEMB Table

Select Enabled to include the OEMB Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

Headless Mode (Available ACPI Aware O/S='Yes')

This feature is used to enable system to function without a keyboard, monitor or

mouse attached The options are Enabled and

Disabled

NUMA Support

Select Enabled to enable Non-Uniform Memory Access support to improve CPU

performance for a system that has an OS with NUMA support. The options are

Enabled

and Disabled.

Chipset ACPI Confi guration

This feature is used to confi gure Chipset ACPI (Advanced Confi guration and Power

Interface) settings.

Energy Lake Feature

Select Enabled to use Intel Energy Lake technology to enhance power effi ciency.

The options are

Disabled

and Enabled.

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.

The options are Enabled and

Disabled

USB Device Wakeup From S3/S4

Select Enable to wake up the system via a USB device when the system is in S3

or S4 State. The options are Enabled and

Disabled

Содержание SUPERSERVER 8016B-TLF













































































































Результаты поиска

Содержание SUPERSERVER 8016B-TLF

Отзывы:

Похожие инструкции для SUPERSERVER 8016B-TLF

Бренды по названию

Популярные бренды

Supermicro SUPERSERVER 8016B-TLF, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 8016B-TLF

Отзывы:

Похожие инструкции для SUPERSERVER 8016B-TLF

Бренды по названию

Популярные бренды