Supermicro SC825M Series Скачать руководство пользователя

Страница: 61 / 88

5-23

Chapter 5: Chassis Setup and Maintenance

5-12 DVD Drive and USB/COM Port

The SC825M(B) includes a metal bracket that supports the installation of a slim DVD
drive and a USB/COM port tray. Please refer to Section 1-2 to determine whether
these are standard or optional parts.

Other optional parts can be installed in place of a slim DVD drive or USB/COM port
tray. To order, visit the Supermicro website at

www.supermicro.com

and click the

Where to Buy link. Reference part number MCP-220-81506-0N (fitting DVD slot)
and/or MCP-220-81504-0N (fitting USB/COM port slot).

Replacing the DVD Drive or USB/COM Port

1. Remove the hard drive housing and DVD drive bracket. For instructions on doing

this, see the section of this chapter on

Installing the Motherboard

2. Remove the require part (DVD drive, USB/COM port, or dummy covers) from

the metal bracket. They are secured by screws on both sides of the bracket.

3. Replace with other optional parts as needed.

4. Reinstall the bracket to the chassis and reconnect the cables to the motherboard

and backplane.

5-13 Optional Front Bezel

The SC825M(B) chassis supports an optional full-face locking front bezel for added
security. To order it, visit the Supermicro website at

www.supermicro.com

and click

the

Where to Buy

link. Reference part number MCP-210-82502-0B.

Содержание SC825M Series

























































































Результаты поиска

Содержание SC825M Series

Отзывы:

Похожие инструкции для SC825M Series

Бренды по названию

Популярные бренды

Supermicro SC825M Series, Руководство пользователя

Результаты поиска

Содержание SC825M Series

Отзывы:

Похожие инструкции для SC825M Series

Бренды по названию

Популярные бренды