Supermicro SC825M Series, Руководство пользователя

Страница: 57 / 88

5-19
Chapter 5: Chassis Setup and Maintenance
Figure 5-20. Placing the System Fans
5. Place the new fan into the vacant space in the housing while making sure the
arrows on the top of the fan (indicating air direction) point in the same direction
as the arrows on the other fans. Each fan includes rubber feet to reduce vibra-
tions. Always use all four feet when placing a system fan.
6. Connect the new fan to the motherboard.
7. Replace the DVD drive assembly (if equipped) and hard drive housing.
8. Power up the system to check the new fan performance.
9. Close the chassis cover.
Relocating the Fan Holder (825MBTQC-R802LPB/WB only)
1. Power down the system and remove the power cord from the back of the
power supply module as described in Section 5-2. Remove the chassis cover
as described in Section 5-3.
2. Remove the hard drive housing and DVD drive assembly. For instructions on
doing this, see the section in this chapter on Installing the Motherboard.
3. Disconnect all fans from the motherboard and lift the fans and fan holder away
from the chassis.
4. Remove the current fan holder pins by using the supplied hex wrench.