Supermicro SC825M Series Скачать руководство пользователя | Manualshive

Страница: 11 / 88

background image

1-3

Chapter 1: Introduction

1-4 Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning to
the manufacturer, the RMA number should be prominently displayed on the outside
of the shipping carton, and mailed prepaid or hand-carried. Shipping and handling
charges will be applied for all orders that must be mailed when service is complete.

For faster service, RMA authorizations may be requested online (

http://www.super-

micro.com/support/rma/

).

Whenever possible, repack the chassis in the original Supermicro carton, using the
original packaging material. If these are no longer available, be sure to pack the
chassis securely, using packaging material to surround the chassis so that it does
not shift within the carton and become damaged during shipping.

This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.

During the warranty period, contact your distributor first for any product problems.

«
...
9
10
11
12
13
...
»

Содержание SC825M Series

























































































Отзывы:

Нет отзывов

Похожие инструкции для SC825M Series

Бренд: CommScope Страницы: 26

kvm-tec SMARTflex 6021

Бренд: Ihse Страницы: 4

StorCenter Pro 400e

Бренд: Iomega Страницы: 16

Sun Disk Shelf-24x3.5" SAS-2

Бренд: Sun Oracle Страницы: 22

HARTMANN ELECTRONIC VME64x Basic 1U

Бренд: Phoenix Mecano Страницы: 35

HARTMANN ELECTRONIC PXCe4006 Series

Бренд: Phoenix Mecano Страницы: 36

SnapServer XSR 40

Бренд: Overland Storage Страницы: 5

Бренд: Overland Storage Страницы: 10

Бренд: Ariesys Страницы: 8

Бренд: Ariesys Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды