Supermicro SC825M Series, Руководство пользователя

Страница: 59 / 88

5-21
Chapter 5: Chassis Setup and Maintenance
The SC825M(B) chassis has two 700W or 800W power supplies. They are auto-
switching so that they automatically sense and operate at a 100v to 240v input
voltage. An amber light will be illuminated on the power supply when the power is
off. An illuminated green light indicates that the power supply is operating.
Power Supply Replacement
The chassis includes a redundant power supply. Power supplies can be replaced
without powering down the system. Replacement units can be ordered directly from
Supermicro (see contact information in Chapter 1).
5-11 Power Supply
Replacing the Power Supply
1. Push the release tab on the back of the power supply as illustrated.
2. Pull the power supply out using the handle provided.
3. Replace the failed power module with a new unit. To do this, push the new power
supply module into the power bay until you hear a click.
4. Plug the AC power cord back into the module.
Figure 5-23. Removing the Power Supply
Release Tab