Supermicro AS-1020P-8R, Руководство пользователя

Страница: 82 / 104

7-10
AS1020P-T(R)/1020P-8(R) User's Manual
System Fan Monitor
Fan Speed Control Modes
This feature allows the user to determine how the system will control the
speed of the onboard fans. If the option is set to "3-pin fan", the fan speed
is controlled based upon the CPU die temperature. When the CPU die tem-
perature is higher, the fan speed will be higher as well. If the option is set to
"4-pin", the fan speed will be controlled by the Thermal Management Settings
pre-confi gured by the user with this setting. Select "3-pin" if your chassis
came with 3-pin fan headers. Select "4-pin" if your chassis came with 4-pin
fan headers. Select "Workstation" if your system is used as a Workstation.
Select "Server" if your system is used as a Server. Select "Disable" to disable
the fan speed control function to allow the onboard fans to continuously run at
full speed (12V). The options are 1) Disable, Full Speed 2) 3-pin (Server)
and 3) 3-pin (Workstation).
FAN1 Speed through FAN10 Speed
The speeds of the onboard fans (in rpm) are displayed here.
7-4 PCI/PnP Menu
Clear NVRAM
Select Yes to clear NVRAM during boot-up. The options are Yes and No .
Plug & Play OS
Select Yes to allow the OS to confi gure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select No
to allow AMIBIOS to confi gure all devices in the system.
PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. Select a value to
set the PCI latency in PCI clock cycles. Options are 32, 64 , 96, 128, 160, 192,
224 and 248.
Allocate IRQ to PCI VGA
Set this value to allow or restrict the system from giving the VGA adapter card an
interrupt address. The options are Yes and No.