Supermicro AS-1020P-8R, Руководство пользователя

Страница: 37 / 104

Chapter 5: Advanced Serverboard Setup
5-3
4. With the CPU inserted into the
socket, inspect the four corners
of the CPU to make sure that it is
properly installed and fl ush with the
socket.
5. Gently press the CPU socket lever
down until it locks in the plastic tab.
For a dual-processor system, repeat
these steps to install another CPU
into the CPU#2 socket.
Note: if using a single processor,
only CPU 1 DIMM slots are ad-
dressable.
Installing the Heatsink Retention Modules
Two heatsink retention modules (BKT-0005) and four screws are included in the
accessory box. (Note that these retention modules are not needed when SNK-
P0012 heatsinks are being used.) Once installed, these are used to help attach the
heatsinks to the CPUs. To install, position the module so that the CPU backplate
standoffs insert through the holes on the heatsink retention module and the four
feet on the module contact the serverboard. Secure the retention module to the
backplate with two of the screws provided. Repeat for the second CPU socket.
Note: BKT-0005 is included for use with third party heatsinks only. When installing
SNK-P0012 heatsinks, only BKT-0004 (the CPU backplate) is needed. The BKT-
0005 retention module was designed to provide compatibility with clip-and-cam type
heatsinks from third parties.
Figure 2-1. CPU Backplate/Heatsink Retention Module Installation