Supermicro A+ Server AS -2014TP-HTR, Руководство пользователя

Страница: 83 / 124

Chapter 6: UEFI BIOS
83
Chipselect Interleaving
This setting controls interleave memory blocks across the DRAM chip for node 0. The
options are Disabled and
Auto .
BankGroupSwap
This setting controls the Bank Group Swap. The options are Enabled, Disabled and Auto .

CPU1 Memory Information
These sections are for informational purposes. They will display some details about the
detected memory according to each CPU on the motherboard, such as:
• Detected Size (per slot, in MB)
• Current Speed (MT/s)

PCIe/PCI/PnP Configuration
This menu provides PCIe/PCI/PnP configuration settings and information.
PCI Devices Common Settings
Above 4G Decoding
This setting enables or disables 64-bit capable devices ability to be decoded in above 4G
address space (only if the system supports 64-bit PCI decoding). The options are Disabled
and
Enabled .
SR-IOV Support
If the system has SR-IOV capable PCI-E devices, this setting will enable or disable the Single
Root IO Virtualization Support for the system. The options are
Disabled and Enabled.
BME DMA Mitigation
Use this setting to re-enable the Bus Master Attribute that was disabled during PCI enumeration
for PCI bridges after SMM is locked. The options are
Disabled
and Enabled.
ARI Forwarding
If supported by the hardware and set to 'enabled', the downstream port disables its traditional
device number field, being 0 enforcement, when turning a type1 configuration request into
a type0 configuration request. This permits access to extended functions in an ARI device
immediately below the port. The options are Disabled and Enabled.
PCIe Spread Spectrum
Use this setting to enable or disable PCI-E Spread Spectrum for your system. The options
are
Disabled and Enabled.