Supermicro A+ Server AS -2014TP-HTR, Руководство пользователя

Страница: 52 / 124

A+ Server AS -2014TP-HTR User's Manual
52
Figure 3-14. Removing Seven Screws from the Pulling Bracket
Installing an SIOM Module into the Motherboard Drawer
1. Remove the four screws securing the two riser brackets in the node. Remove the screw
at the center of the pulling bracket. See Figure 3-3 in Section 3.3.
2. Remove the seven screws securing the pulling bracket to the node. See Figure 3-14.
3. Remove the screw holding the SIOM shield on the pulling bracket. See Figure 3-15.
Install the correct I/O shield. See Figure 3-16.
4. Remove the two screws holding the SIOM module and carefully disconnect the module
from the motherboard. See Figure 3-17.
5. Connect a new SIOM module and replace the two screws on the SIOM module using
about 3-pounds of torque.
6. Replace the pulling bracket and secure the seven screws from Step 2 above.
7. Replace the two riser card brackets and secure the five screws from Step 1 above.
8. Insert the motherboard drawer into the chassis.