Supermicro A+ Server AS -2014TP-HTR, Руководство пользователя

Страница: 41 / 124

41
Chapter 3: Maintenance and Component Installation
3.4 Chassis Components
Hard Drives
You do not need to access the inside of the chassis or remove power to replace or swap
drives. Proceed to the next step for instructions. You must use standard 3.5 inch drives in
the system.
Note:
Refer to Supermicro's website for setup guidelines: < http://www.supermicro.com/
support/manuals/ >.
The chassis contains four individual serverboards in separate node drawers
(Figure 3-5). Each serverboard node controls a set of three hard drives. Note that if a
serverboard node drawer is pulled out of the chassis, the hard drives associated with that
node will power down as well.
Serverboard Drawer Locations in the Chassis
Serverboard B
Controls HDDs B1, B2 and B3
Serverboard D
Controls HDDs D1, D2 and D3
Serverboard A
Controls HDDs A1, A2 and A3
Serverboard C
Controls HDDs C1, C2 and C3
Figure 3-5. Hard Drives and their Corresponding Serverboard Nodes
SB: A
SB: B
SB: C
SB: D
A
D
C
B