Supermicro A+ Server AS -2014TP-HTR, Руководство пользователя

Страница: 55 / 124

55
Chapter 3: Maintenance and Component Installation
Power Supply
The AS -2014TP-HTR has two high-efficiency 2000 Watt power supplies, which is auto-
switching capable. This enables it to automatically sense and operate with a 100V to 240V
input voltage.
Power Supply Replacement
The chassis utilizes two redundant power supplies. In the unlikely event that the
power supply unit needs to be replaced, one power supply can be removed, without powering
down the system. Replacement units can be ordered directly from Supermicro (see the contact
information in the Preface of this manual).
Changing the Power Supply
1. Push the release tab (on the back of the power supply) as illustrated.
2. Pull the power supply out using the handle provided.
3. Push the new power supply module into the power bay until you hear a click.
4. Plug the AC power cords back into both modules and power up the nodes.
Figure 3-19. Removing/Replacing a Power Supply
Release Tab