Supermicro A+ Server AS -2014TP-HTR, Руководство пользователя

Страница: 81 / 124

Chapter 6: UEFI BIOS
81
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial
data communication. Select 2 Stop Bits if slower devices are used. The options are
1 and 2.

CPU Configuration
SMT Control
Use this setting to specify Simultaneous Multithreading. Options include Disabled for 1T single
thread and
Auto for 2T two-thread if your system is capable of it.
Core Performance Boost
This setting is used to configure for Core Performance Boost. Options include Disabled and
Auto .
Global C-state Control
This setting is used to configure for Global C-state Control. Options include Disabled, Enabled
and Auto .
Core Control
This sets the number of cores to be used by your system. Once this option has been used to
remove any cores, a power cycle is required in order for the future selections to take effect.
Options include Auto , TWO (1+1), Four (2 + 2) and Six (3 + 3). If unsure, leave this to Auto.
L1 Stream HW Prefetcher / L2 Stream HW Prefetcher
This setting is used to enable or disable the L1/L2 Stream Hardware Prefetcher. The options
are Disabled, Enabled and
Auto .
SVM Mode
This setting enables or disables CPU Virtualization. The options are Disabled and
Enabled
.
SMEE
This setting enables or disables secure memory encryption control. The options are Disabled
and Enabled.

CPU1 Information
These sections are for informational purposes. They will display some details about the
detected CPUs on the motherboard, such as:
• CPU Version
• Number of Cores Running
• Clock speed
• Processor Family