Sunstream SWIFTSHIELD A Series, Руководство по сборке, установке и использованию

Страница: 29 / 52

FORM NO. 660769 REV. C PAGE 29
2-M
Cross Beam Installation
Steps:
1. Apply anti-seize to all bolt threads before installing nuts.
2. Temporarily attach both ends of
Cross Beam with nuts and bolts to arms.
3. Properly torque nuts on Cross Beam .
4. Check level of hydraulic fluid reservoir in control box.

Actuate lift to the down position, with the SunShield in the uncovered position.

Hydraulic fluid level should be within 1” of top. Add SunFluid as necessary.
* Hydraulic hoses not shown.
Bolt SS,
3/8-
16 x 3”
4 Places
Nut SS, Nylok
3/8-16
4 Places
Starboard Fin
Plate with Pin