Sunstream SWIFTSHIELD A Series, Руководство по сборке, установке и использованию

Страница: 42 / 52

FORM NO. 660769 REV. C PAGE 42
4-A
Removing the Cover
You may have to remove your cover from time to time for maintenance or if you live
in an area prone to high wind storms. Please note the following wind guidelines re-
garding your cover.
1. Sunstream
®
recommends not operating the SwiftShield™ in winds above 25mph .
2. Sunstream
®
recommends securing your cover by the tie down points when winds
are between 40mph-70mph.
3. Sunstream
®
recommends removing your cover when winds are to exceed 70mph.
1. Actuate arms to forward position (uncover boat)
2. Disconnect one bow sprit line.
3. Connect a rope to the disconnected
bow sprit line (rope to be at least 20 feet)
4. While one person holds rope, another person will need to disconnect the other bow
sprit line. (once other bow sprit line is disconnected, rope will become taught)
5. While holding rope, slowly and carefully allow roller to wind up. Allow roller to
completely wind up rope.