Sunstream SWIFTSHIELD A Series, Руководство по сборке, установке и использованию

Страница: 21 / 52

FORM NO. 660769 REV. C PAGE 21
2-E

Finding Midpoint of Boat

Pinning the Cylinder Mount Tube
Steps:
1. Using a tape measure, determine overall length of the boat, including swim plat-
form, if equipped.
2. Locate the midpoint between the bow and stern of the boat.
3. With the boat in the standard position on the
SunLift
™
in the full upright position,
adjust Cylinder Mount Tube so that forward lug hole aligns with the midpoint of the
boat.
4. Apply anti-seize to bolt threads before installing nut.
5. Using the
3/8” Bolt and nut , lock Cylinder Mount Tube into position on Side Rail .
You may need to adjust this position later.
6. Repeat on opposite side of the SunLift
™
.
Forward Lug on
Cylinder Mount
Tube
SS Bolt
3/8- 16 x 3.5”
Nut SS,
Nylok 3/8-16
5.