5941A R-net CJSM2 User Guide DCR1266
magicmobility.com.au
1.5
Profile button
The Profile button allows the user to navigate through the available Profiles for the control system. The
number of available Profiles is dependent on how the control system is programmed.
Depending on the way the control system has been programmed a momentary screen may be displayed
when the button is pressed. Refer to section Momentary Screens for details.
1.6
Mode button
The Mode button allows the user to navigate through the available Modes for the control system. The number
of available Modes is dependent on how the control system is programmed.
1.7
Screen buttons
These buttons operate the lighting functions: Hazards, Lights, Left Indicator and Right Indicator.
The function of each button is illustrated by an icon displayed on the LCD screen next to the button.
Pressing the relative button activates and deactivates its function.
Once the function is activated, the icon on the LCD will illuminate or flash depending on the function.
NOTE
If no lighting system is fitted to the wheelchair, these buttons will be inactive.
In all instances, the top left button, when held for a short time, will open the Settings Menu. Refer to
section Settings Menu for more details.
1.8
Light sensor
The Joystick Module contains an ambient light sensor which automatically adjusts screen brightness. Refer to
Settings Menu for programming options.
1.9
LCD Diagnostic LED
The purpose of this LED is to indicate the control system is switched on in the event of an LCD screen failure.
1.10 LCD screen
The status of the control system can be understood by observing the LCD screen. The control system is on
when the screen is backlit. Refer to section Momentary Screens for details.
1.11
IR Transmitter & receiver
The CJSM2 includes an IR transmitter and receiver that allows the CJSM2 to replicate commonly used IR
devices, such as remote controls for TV’s, DVD’s, Cable/Satellite or environmental controls such as
Содержание Magic Mobility R-net CJSM2
Страница 1: ......
