Sunrise Medical Magic Mobility R-net CJSM2, Руководство пользователя

Страница: 13 / 38

5941A R-net CJSM2 User Guide DCR1266 magicmobility.com.au
If set up to control more than one device, a screen such as below will appear.
The joystick should then be used to navigate the menu and select the device to control. Forward and reverse
deflections navigate the menu, while a right deflection selects the highlighted device. For further details of
Bluetooth operation and programming options, refer to the Bluetooth chapter.
2.5.1 BLUETOOTH SCREEN PROGRAMMING
The text to describe each device can be set via the programmable parameter, Device Name.
The screen symbol for each device can be set via the programmable parameter, Screen Graphic.
Refer to chapter Bluetooth Programming for more details.
2.5.2 DISCONNECTING A BLUETOOTH DEVICE
Enter the Settings Menu and select Bluetooth. Set the device you wish to disconnect from to Off.
2.5.3 FLIGHT-SAFE MODE
It is common practice to disable wireless transmissions while on an aircraft. Enter the Settings Menu and
select Bluetooth. Set all the devices to Off.
2.6 General information symbols
2.6.1 LIMP
This message is displayed if a user switch has become disconnected and the control system is programmed
to still allow drive, at a reduced rate.
2.6.2 TIMER
This symbol is displayed when the control system is changing between different states. An example would be
entering into module re-configuration.