Sunrise Medical Magic Mobility R-net CJSM2, Руководство пользователя

Страница: 22 / 38

5941A R-net CJSM2 User Guide DCR1266 magicmobility.com.au
Select Learn Code, by deflecting the joystick to the right while the Command is highlighted.
Point the TV remote control at the CJSM2’s Receiver LED and press the On/Off button twice.
After each successful learn operation a check momentarily appears on the screen, select Learn Code
again.
Point the DVD remote control at the CJSM2’s Rece iver LED and press the On/Off button twice.
After each successful learn operation a check momentarily appears on the screen, select Learn Code
again.
Complete the sequence by highlighting Exit and deflecting the joystick to the left.
This time the On/Off Command will have a Tick and 3 Dots beside it, showing a Learnt Sequence. As
displayed below.
4 ENABLING AND DISABLING IR CODES
IR Codes can be enabled or disabled in the IR Set-up Menu. If a Code is disabled it will not transmit and will
not appear in IR Mode.
To disable an IR Code, deflect the speed paddle of the CJSM2 up or down. A disabled IR Code appears with an
X against the highlighted Command.
To enable an IR Code, deflect the speed paddles on the CJSM2 up or down. An enabled Code appears with a
check against the highlighted Command.
5 DELETING IR CODES
To delete an IR Code for a specific Command, highlight the specific Command in the Appliance menu and
deflect the joystick to the right. Then select the Delete Code option.