Sunrise Medical Magic Mobility R-net CJSM2, Руководство пользователя

Страница: 17 / 38

5941A R-net CJSM2 User Guide DCR1266 magicmobility.com.au
Timers Enables the user to view how many hours the chair has been driven for.
2.7.7 EXIT
Exits the Settings Menu.
3 GETTING READY TO DRIVE
Operate the On/Off paddle. The screen will go through an initializing process then show the base screen as
follows
Check that the Speed Setting is at a level that suits you.
Push the joystick to control the speed and direction of the wheelchair.
NOTE
If you push the joystick before or just after you switch the control system on, the screen will flash the
joystick displaced screen. You must release and centre the joystick to resume normal operation. If you do
not release the joystick within five seconds the wheelchair will not be able to move, even if you release
the joystick and push it again. The screen will display the diagnostic screen at this time. You can reset
this condition by switching the control system off and on again.
If you do not push the joystick as you switch the wheelchair on and the diagnostic screen is displayed, as in
the following diagram, then the R-
net has detected a problem somewhere in the wheelchair’s electrical
system.