Sunrise Medical Magic Mobility R-net CJSM2, Руководство пользователя

Страница: 14 / 38

5941A R-net CJSM2 User Guide DCR1266 magicmobility.com.au
2.6.3 RESTART
When the control system requires a reboot; for example, after a module re-configuration, symbol will be
flashed.
2.6.4 SLEEP
This symbol will be displayed for a short time before the R-net enters into a sleep state.
2.6.5 CROSS & TICK
These symbols will be displayed during configuration procedures.
Process
completed
correctly
Process not
completed
correctly
2.6.6 E-STOP
If the control system is programmed for latched drive or seating control operation, then it is normal for an
Emergency Stop Switch to be connected into the External Profile/Mode Switch Jack.
If the Emergency Stop Switch is operated or disconnected, this symbol will be displayed.
2.6.7 JOYSTICK DISPLACED
If the joystick is operated before or just after you switch the control system on, the screen will flash the
joystick displaced screen.
You must release and centre the joystick to resume normal operation. If you do not release the joystick within
five seconds the wheelchair will not be able to move, even if you release the joystick and operate it again. The
screen will display a diagnostic screen at this time. You can reset this condition by switching the control
system off and on again.