5941A R-net CJSM2 User Guide DCR1266
magicmobility.com.au
Enter Bluetooth Mode and select the device you wish to pair with.
Deflect the joystick in the forward direction and hold until there is a beep. This will take approximately 10
seconds, then release.
Deflect the joystick in the reverse direction and hold until there is a beep. This will take approximately 10
seconds, then release.
A screen such as below will appear
–
the flashing blue icon confirming the CJSM2-BT is in Discovery Mode.
Depending on which type of device is being paired with
–
a Windows PC, an Android device or an iDevice
–
refer to one of the following three sections.
2.1
Pairing with a Windows PC
If the PC does not have integrated Bluetooth, then a receiver dongle must be used and its drivers installed.
PG Drives Technology recommends use of the following Bluetooth dongles:
Trust BT-2400
Linksys USBBT100-UK
Belkin F8T012uk1 Version 1000
Once a Bluetooth connection is confirmed, the following process should be undertaken on the PC:
Enter My Bluetooth Devices and a screen such as below should appear.
Click
‘Add’
to open the Bluetooth Device Wizard and a screen such as below should appear.
Содержание Magic Mobility R-net CJSM2
Страница 1: ......
