5941A R-net CJSM2 User Guide DCR1266
magicmobility.com.au
Chapter 3
–
Bluetooth Set-up & Operation
1
INTRODUCTION
The R-net CJSM2-BT allows a wheelchair user to control multiple Bluetooth-enabled devices. Typical
applications include PC mouse control or operation of a Smart device.
Up to four devices can be controlled. Two of which can be Apple iOS devices and two of which can be
Windows or Android devices.
1.1
Operational rules
Bluetooth Mode will only be available if one or more devices are set to On in the Settings Menu. See section
Bluetooth Mode Screen Configuration for more details.
The CJSM2-BT and target Bluetooth devices will remain paired until they are disconnected by the target
device.
Once a CJSM2-
BT has been paired with a Bluetooth device, the module remembers the device’s unique
identifier. This means the wheelchair can be driven outside the operating range of the Bluetooth connection
and upon returning within range the connection will be automatically reinstated.
1.2
Bluetooth mode screen configuration
This is a two-stage process. Firstly, a device or devices must be set to On from the Settings Menu. Secondly,
for each device a screen graphic and a name can be set via PC Programming. The following two sections
describe each process.
1.2.1
SETTINGS MENU
Enter the Settings Menu, as described in the Operation chapter, and select Bluetooth.
A screen as below will appear.
Set one or more of the devices to On. The R-net system must now be switched off and on again.
For the remainder of this section, it will be assumed the Device Name parameters have been set per the
following screen.
2
PAIRING WITH A BLUETOOTH DEVICE
The CJSM2-BT must first be put into Discovery Mode via the sequence below.
Содержание Magic Mobility R-net CJSM2
Страница 1: ......