background image

 

5941A R-net CJSM2 User Guide DCR1266 

magicmobility.com.au 

If the battery gauge shows just red and yellow, then you should charge the batteries as soon as you can. (Bars 
1-7) 

If the battery gauge shows just red, either steady or flashing slowly, then you should charge the batteries 
immediately. (Bars 1-3) 

WARNING: 

Do not operate the control system is the battery is nearly discharged. Failure to comply with this 
condition may leave the user stranded in an unsafe position, such as in the middle of a road.  

2.2 

Information bar 

This area contains information and warning symbols, as well as clock.  

2.2.1  FOCUS 

When the control system contains more than one method of direct control, such as a secondary Joystick 
Module or a Dual Attendant Module, then the Module that has control of the wheelchair will display the 
Focus symbol. 

2.2.2  BLUETOOTH SIGNAL ICON 

This symbol appears when Bluetooth is enabled. If the symbol is white, the system is not paired to an external 
Bluetooth device. If the symbol is blue, the system is paired to an external Bluetooth device. When the system 
has been placed into Discovery Mode, the icon will flash blue. 

2.2.3  MOTOR TEMPERATURE 

This symbol is displayed when the control system has intentionally reduced the power to the motors, in order 
to protect them against heat damage. 

2.2.4  CONTROL SYSTEM TEMPERATURE 

This symbol is displayed when the control system has intentionally reduced its own power, in order to protect 
itself against heat damage. 

2.2.5  CLOCK 

This displays the current time in a numeric format. 

The clock is user adjustable. Adjustable options are: 

 

Visibility, whether the clock is displayed on screen. 

 

The display format, 12 or 24 hour. 

 

The time, the user can adjust the time. 

These adjustments are made within the Settings Menu. Refer to section Settings Menu for more details.  

Содержание Magic Mobility R-net CJSM2







































Отзывы: