Figure D4 – Ice Separator
Ice Expeller
The molded Delrin expeller blades come out from a central axle that rotates over nylon bearings in the front and rear
parts. Each blade pushes an ice section and withdraws it from the mold. The expeller-propelled extreme is “D” shaped.
The bearings surface is lubricated with silicon grease. See Figure D5.
Figure D5 – Ice Expeller
Water valve set
The water valve is propelled by a solenoid and when activated, leaves the water pass from the feeding line to the ice
mold. The quantity of water is directly proportional to the period during which the valve switch is activated. A washer
inside the water valve maintains a permanent flow with a 2-to 15-kPa feeding line pressures. It will not compensate the
pressures under 2 kPa or over 15 kPa. A caliber 60 screen located in front of the flow washer prevents the pass of
suspicious material. See Figure D6.
Figure D6 – Water Valve
PAGE. D3
"D" Shape ejector
Содержание 20060328
Страница 1: ...Service Manual Refrigerators 20060328...
Страница 4: ...SERIAL LABEL INFORMATION PAGE A2 SERIAL NUMBER LABEL LOCATION...
Страница 44: ...CATOLOGO DE PARTES SPARE PARTS CATALOG...
Страница 55: ...k ENSAMBLE CONDENSADOR ASSEMBLY CONDENSER SNR10TFPA SNR12TFOA SNR12TFPA SNR13TFOA SNR13TFPA SNR14TFPA...