Sunbeam 20060328, Руководство по обслуживанию

Страница: 19 / 64

Change of defrosting resistances
Replacement of defrosting resistance, fridge evaporator plate (automatic / manual defrost models)
1. Disconnect the electric current unit.
2. Remove all the objects on the shelves located in the fridge.
3. Unscrew the plate fastening caps or twist them 90º rights if the cap has a slot.
4. Lift the plate softly to an angle under or 45º.
5. Dismount the control box, lifting the knob and removing fastening screws.
6. Disconnect the resistance and replace it by a new one by connecting the cables as per the cables diagram.
7. Lower the plate softly and put the fastening caps again.
8. Put the respective shelves in their positions.
Note: As of August 1997, the resistance connection is made directly in the control box, as shown in the cables
diagram.
Replacement of freezer defrosting resistance (all the automatic defrosting models)
1. Unplug the electric current unit.
2. Take away the freezer accessories (shelves).
3. Remove shelves rear supports.
4. Dismount the fan cover.
5. Dismount the evaporator cover by removing two caps and one screw.
6. Disconnect the resistance and loosen the aluminum loops that join them with the evaporator. Take away the old
resistance and install the new one. Fix it steadily in the aluminum loops or aluminum presses and connect again in
accordance with the refrigerator cables diagram.
7. Re - assemble the cover and the fan cover.
PAGE. B12