Sun Oracle 4540 - Phaser Copystation, Руководство по обслуживанию, Страница: 64 / 264

2-30 Sun Fire X4500/X4540 Server Service Manual • May 2010
2.12.3 BIOS PCI/PnP Menu (X4500)
Main Advanced PCIPnP Boot Security Chipset Exit
********************************************************************************
* Advanced PCI/PnP Settings ** NO: lets the BIOS *
* ***************************************************** configure all the *
* WARNING : Setting wrong values in below sections ** devices in the system. *
* may cause system to malfunction. ** YES: lets the *
* ** operating system *
* Plug & Play O/S [No] ** configure Plug and *
* PCI Latency Timer [64] ** Play (PnP) devices not *
* Allocate IRQ to PCI VGA [Yes] ** required for boot if *
* Palette Snooping [Disabled] ** your system has a Plug *
* PCI IDE BusMaster [Disabled] ** and Play operating *
* OffBoard PCI/ISA IDE Card [Auto] ** system. *
* Scanning onboard Marvell ROM [Enabled] ** *
* Scanning onboard NIC-0 OPROM [Enabled] ** ** Select Screen *
* Scanning onboard NIC-1 OPROM [Enabled] ** ** Select Item *
* Scanning onboard NIC-2 OPROM [Enabled] ** +- Change Option *
* Scanning onboard NIC-3 OPROM [Enabled] ** Available: Specified *
* Scanning OPROM on PCIX SLOT0 [Enabled] ** DMA is available to be *
* Scanning OPROM on PCIX SLOT1 [Enabled] ** used by PCI/PnP *
* Onboard PCI NIC MAC Address ** devices. *
* GE NIC 1 : 00 14 4F 20 DA FC ** Reserved: Specified *
* GE NIC 2 : 00 14 4F 20 DA FD ** DMA is reserved for *
* GE NIC 3 : 00 14 4F 20 DA FE ** use by legacy ISA *
* GE NIC 4 : 00 14 4F 20 DA FF ** devices. *
* ** *
* IRQ3 [Available] ** *
* IRQ4 [Reserved] ** *
* IRQ5 [Available] ** *
* IRQ7 [Available] ** ** Select Screen *
* IRQ9 [Available] ** ** Select Item *
* IRQ10 [Available] ** +- Change Option *
* IRQ11 [Available] ** F1 General Help *
* IRQ14 [Available] ** F10 Save and Exit *
* IRQ15 [Available] ** ESC Exit *
* ** *
* DMA Channel 0 [Available] ** ** Select Screen *
* DMA Channel 1 [Available] ** ** Select Item *
* DMA Channel 3 [Available] ** +- Change Option *
* DMA Channel 5 [Available] ** F1 General Help *
* DMA Channel 6 [Available] ** F10 Save and Exit *
* DMA Channel 7 [Available] ** ESC Exit *
* ** *
* Reserved Memory Size [Disabled] ** *
********************************************************************************