Sun Oracle 4540 - Phaser Copystation, Руководство по обслуживанию, Страница: 129 / 264

Chapter 3 Maintaining the Sun Fire X4500 and X4540 Servers 3-9
3. Reboot the server. Watch the output from the command and respond to the
confirmation prompts for continuing the update and rebooting the server:
Servicetool is going to collect system information for the service processor for
future part swaps.
The following preconditions must be true for this to work:
* The new service processor must be installed.
Do you want to continue (y|n)? y
Service processor FRU information ready to be collected.
You MUST reboot the service processor to complete
this process. Allow the service processor to fully boot.s
DO NOT UNPLUG THE SYSTEM WHILE THE SERVICE PROCESSOR IS BOOTING!
Would you like to reboot the service processor now (y|n)?y
The system is going down NOW !!
Sending SIGTERM to all processes.
4. Verify the FRU information is updated:
a. Once the SP has rebooted, log into sunservice.
b. Type the following:
cat /var/log/frutool.log
c. Make sure the last line is:
frutool::info::all FRUs updated successfully
d. Make sure the following is true:
i. Product part_number matches the part number on the back of the system.
ii. Product serial_number matches the serial number on the back of the system.
--fru_product_serial_number
Write a new product serial number to the
mainboard FRU.
--fru_chassis_serial_number
Write a new chassis serial number to the
mainboard FRU.
--fru_asset_tag
Write a new asset tag to the mainboard FRU.
TABLE 3-6
Servicetool Options
Other Options Value