Sun Oracle 4540 - Phaser Copystation, Руководство по обслуживанию, Страница: 213 / 264

Appendix C Status Indicator LEDs C-3
TABLE C-1
Controls and Indicators
# Name Color Description
1 Locate
button/LED White Press to toggle on/off locally. Remains on (as fast
blinking 4Hz) for 30 minutes or until turned off.
Operators can turn this LED on remotely to help them
locate the server in a crowded server room:
• In the ILOM GUI, navigate to System Monitoring >
Indicators and select the radio button next to
/SYS/LOCATE. From the Actions drop-down menu,
select “Set LED to Fast Blink” or “Turn LED Off.”
• In the CLI, enter:
set /SYS/LOCATE value=[fast_blink|off]
• Press to turn on or off.
Press the Locate LED/Switch for five seconds to turn all
indicators on for 15 seconds.
2 System Fault
LED Amber Off—Normal operation
On—Service action is required.
A system running under these conditions are in a fault
condition, but the SP does not log the reason the service
LED is illuminated:
• 220VAC with only 1 PSU
• 110VAC with only two PSUs
3 Power/OK
LED Green Steady on—Power is on and system is operational.
Blinking—Standby power is on but main power is off.
Blinks briefly once every 3 seconds.
Off—Power is off.
4 System
power button If on, press briefly for a controlled shut down. Press and
hold for 4 seconds for immediate shutdown.
Caution - Caution there may be data loss for immediate
shutdown.
See Section 2.1, “Powering On the Server” on page 2-2 for
details.