Sun Oracle 4540 - Phaser Copystation, Руководство по обслуживанию, Страница: 39 / 264

Chapter 2 Powering On and Configuring BIOS Settings 2-5
4. Modify the setup field and close the screen.
5. If you need to modify other setup parameters, use the arrow and Tab keys to
navigate to the desired screen and menu item, then repeat Steps 1 through 3.
Otherwise, go to Step 5.
6. Press and release the right arrow key until the Exit menu screen is displayed.
7. Follow the instructions on the Exit menu screen to save your changes and exit
the Setup utility.
2.5 Ethernet Port (NIC) Device and Driver
Naming
These servers each have four 10/100/1000BASE-T Gigabit Ethernet ports connected
to individual Network Interface Cards (NICs). The chassis labeling of the physical
ports is shown in
FIGURE 1
.
FIGURE 1
Ethernet Port Chassis Labeling Designations
The logical device naming for the NICs is reported differently by different interfaces
and operating systems.
NET 2 NET 3
NET 0 NET 1