Sun Microsystems X3-3L, Руководство по установке

Страница: 65 / 80

Installing Windows Server Operating System 55
4. In the Boot Device menu, select the network port that is configured to
communicate with your PXE network installation server.
The network bootloader loads and a boot prompt appears. After a few seconds the
installation kernel will begin to load.
5. To complete the installation, do one of the following, depending on which
version of Windows Server you are installing:
■
For Windows Server 2008, refer to Step 5 of “Install Windows Server 2008 (SP2
or R2 SP1) Using Local or Remote Media” on page 28
■
For Windows Server 2012, refer to Step 5 of “Install Windows Server 2012 (R2)
Using Local or Remote Media” on page 38