Sun Microsystems X3-3L, Руководство по установке

Страница: 19 / 80

About Microsoft Windows Server Operating System Installs 9
Selecting the Installation Target Option
This section describes how to set up the installation target.
■
“Installation Target Options” on page 9
■
“Set Up a Local Storage Drive (HDD or SSD) as the Installation Target” on page 9
■
“Set Up a Fibre Channel Storage Area Network Device as the Installation Target”
on page 9
Installation Target Options
With the exception of the internal Oracle System Assistant flash drive (which is
reserved for Oracle System Assistant), you can install the operating system on any of
the storage drives installed in the server. These include hard disk drives (HDDs) and
solid state drives (SSDs).
For servers equipped with Fibre Channel PCIe Host Bus Adapters (HBAs), you can
choose to install the operating system to an external FC storage device.
▼
Set Up a Local Storage Drive (HDD or SSD) as
the Installation Target
●
Ensure that the HDD or SSD is properly installed and powered on.
For more information about installing and powering on a HDD or SSD, see the
Sun Server X3-2L Service Manual, “Servicing Storage Drives and Rear Drives
(CRU)” on page 45 .
▼
Set Up a Fibre Channel Storage Area Network
Device as the Installation Target
1. Ensure that the PCIe host bus adapter (HBA) is properly installed in the server.
For more information about installing a PCIe HBA option, see the Sun Server
X3-2L Service Manual, “Servicing PCIe Cards (CRU)” on page 77 .