Sun Microsystems X3-3L, Руководство по установке

Страница: 29 / 80

Preparing to Install the Operating System 19
2. When prompted in the BIOS screen, press F2 to access the BIOS Setup Utility.
After a few moments, the BIOS Setup Utility appears.
3. To ensure that the factory defaults are set, do the following:
a. Press F9 to automatically load the optimal factory default settings.
A message appears prompting you to continue this operation by selecting
OK
or
to cancel this operation by selecting
CANCEL.
b. In the message, highlight
OK
then press Enter.
The BIOS Setup Utility screen appears with the cursor highlighting the first
value in the system time field.
4. In the BIOS Setup Utility, do the following to edit the values associated with
the system time or date.
a. Highlight the values you want to change.
Use up or down arrow keys to change between the system time and date
selection.
b. To change the values in the highlighted fields use these keys:
■
PLUS (+) to increment the current value shown
■
MINUS (-) to decrement the current value shown
■
ENTER to move the cursor to the next value field
5. To access the boot settings, select the Boot menu.
The Boot menu appears.
6. In the Boot menu, verify that the UEFI/BIOS Boot Mode is set to the appropriate
value for your installation.
To change the boot mode, use the up and down arrow keys to select the
UEFI/BIOS Boot Mode field and use the + and - keys to toggle between UEFI and
Legacy.