Sun Microsystems X3-3L, Руководство по установке

Страница: 30 / 80

20 Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
7. In the Boot menu, use the down arrow key to select
Boot Device Priority,
and then press Enter.
The Boot Device Priority menu appears listing the order of the known bootable
devices. The first device in the list has the highest boot priority.
8. In the Boot Option Priority menu, do the following to edit the first boot device
entry in the list:
a. Use the up and down arrow keys to select the first entry in the list, then press
Enter.
b. In the Options menu, use the up and down arrow keys to select the default
permanent boot device, then press Enter.
Note – You can change the boot order for other devices in the list by repeating Steps
8a and 8b for each device entry you want to change.
The device strings listed on the Boot Device Priority list and Options menu are in
the format of:
device type , slot indicator , and product ID string
9. To save changes and exit the BIOS Setup Utility, press F10.
Alternatively, you can save the changes and exit the BIOS Setup Utility by
selecting
Save and Reset
on the Exit menu. A message appears prompting you
to save changes and exit setup. In the message dialog, select
OK
, then press Enter.
Note –
When using the Oracle ILOM Remote System Console, F10 is trapped by the
local OS. You must use the F10 option listed in the Keyboard drop-down menu that
is available at the top of the remote console application.
▼
Switch Between Legacy BIOS and UEFI BIOS
Mode
The BIOS firmware supports both legacy BIOS and Unified Extensible Firmware
Interface (UEFI). The default setting is legacy BIOS. Because the Windows Server
2008 and 2012 operating systems support both Legacy BIOS and UEFI BIOS, you
have the option of setting BIOS to either Legacy BIOS Boot Mode or UEFI BIOS Boot
Mode before you perform the installation.
Note – After you have installed the operating system, if you decide you want to
switch from Legacy BIOS Boot Mode to UEFI BIOS Boot Mode or vice versa, you
must remove all partitions and reinstall the operating system.