Sun Microsystems X3-3L, Руководство по установке

Страница: 36 / 80

26 Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
b. Proceed to Step 4.
3. To launch Oracle System Assistant using the Oracle ILOM Remote System
Console and BIOS, perform the following steps:
a. From the Oracle ILOM web interface Summary page, click the Remote
Console Launch button.
The Oracle ILOM Remote Console screen appears.
b. Reset or power on the server.
For example:
■
From the local server , press the Power button (approximately 1 second) on
the front panel of the server to power off the server, and then press the
Power button again to power on the server.
■
From the Oracle ILOM web interface
, click Host Management > Power
Control and select Reset from the Select Action list box.
■
From the Oracle ILOM CLI , type:
reset /System
Note – The next events occur very quickly; therefore, focused attention is needed for
the following steps. Watch carefully for these messages as they appear on the screen
for a brief time. You might want to enlarge the size of your screen to eliminate scroll
bars.
c. Press the F9 key.
Oracle System Assistant is launched, and the Overview screen appears.
4. To update to the latest software release package, click the Get Updates button in
Oracle System Assistant.
This action ensures that the latest software release package is installed before you
begin the OS installation.
Note – Server web access is required to update Oracle System Assistant.
5. To update the server firmware, click the Update Firmware button.
This action ensures that the server has the latest firmware and drivers before you
begin the OS installation.
6. To install the OS, click the Install OS button.
The Install OS screen appears.
7. From the Supported OS drop-down list, select your OS.