Sun Microsystems Ultra 5, Руководство по обслуживанию

Страница: 129 / 258

7-1
C H A P T E R
7
Storage Devices
This chapter describes how to remove and replace the Ultra 5 storage devices.
This chapter contains the following topics:
■
Section 7.1 “Diskette Drive” on page 7-1
■
Section 7.2 “Hard Drives” on page 7-5
■
Section 7.3 “CD-ROM Drive” on page 7-16
7.1 Diskette Drive
To remove and replace the diskette drive, proceed as follows.
7.1.1 Removing the Diskette Drive
1. Power off the system, remove the system cover, and attach an antistatic wrist strap
as described in Chapter 5.
Caution –
Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
2. Remove the diskette drive as follows (
FIGURE 7-1
and
FIGURE 7-2
):
a. Disconnect the following:
■
Diskette drive cable assembly from the diskette drive
■
Power cable connector from the diskette drive