Sun Microsystems Ultra 5, Руководство по обслуживанию

Страница: 97 / 258

Chapter 4 Troubleshooting Procedures 4-25
4.7.2.12 EIDE Diagnostic
To start the EIDE diagnostic, type
11
at the OBDiag menu prompt. The EIDE
diagnostic validates both the EIDE chip and the IDE bus subsystem.
The following code example shows the EIDE output message.
4.7.2.13 Video Diagnostic
To start the video diagnostic, type
12
at the OBDiag menu prompt. The video
diagnostic validates the graphics.
The following code example shows the video output message.
TTF=’505 ‘
SPEED=’299.80 MHz’
PASSES=’1 ‘
MESSAGE=’Error: External Audio Test not run: Please set the mfg-
mode to sys-ext.’
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===>
CODE EXAMPLE 4-20
EIDE Output Message
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 11
TEST=’ide_test’
SUBTEST=’probe-cmd-device’
SUBTEST=’hd-and-cd-check’
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===>
CODE EXAMPLE 4-21
Video Output Message
Enter (0-13 tests, 14 -Quit, 15 -Menu) ===> 12
TEST=’video_test’
Please connect the monitor and use ttya/ttyb when running this test
if you are using the screen it may be become unreadable
SUBTEST=’mach64-chip-id-vendor-id-check’
SUBTEST=’video-frame-buffer-test’
CODE EXAMPLE 4-19
Audio Output Message (Continued)