Sun Microsystems Ultra 5, Руководство по обслуживанию

Страница: 51 / 258

Chapter 3 Power-On Self-Test 3-3
2. At the second Sun workstation, check the
/etc/remote
file by changing to the
/etc
directory and editing the
remote
file. The following sample
remote
file
text shows connection to serial port B:
3. To use serial port A:
a. Copy and paste the
remote
file text that shows connection to serial port B.
b. Modify the pasted text as follows to change the connection to serial port A:
4. In a shell window on the second Sun workstation, type
tip hardwire
.
The shell window becomes a TIP window directed to serial port A of the tested
system. When power is applied to the tested system, POST messages are displayed
in this shell window.
5. When POST is completed, disconnect the TIP connection as follows:
a. Open another shell window at the second workstation.
b. Type
ps -a
to view the active TIP line and process ID (PID) number.
c. Type the following to disconnect the TIP hardwire process.
hardwire: /dv=/dev/term/b:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
hardwire: /dv=/dev/term/a:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
% tip hardwire
connected
% kill -9 PID#