Chapter 5
Cabinet Subassemblies
5-3
4. Facing the back of the key switch on the inside of the cabinet, use a pair of
needlenose pliers to slide out and remove the metal clip that secures the key
switch to the cabinet (
FIGURE 5-2
).
FIGURE 5-2
Removing and Replacing the Key Switch
5. Pull the key switch out of the chassis opening.
To replace the key switch:
1. Insert the key switch into the panel opening.
2. Facing the back of the key switch on the inside of the cabinet, slide the metal clip
onto the notch of the key switch body to secure it in place (
FIGURE 5-2
).
3. Route the key switch cable to the power sequencer, securing it to the chassis
frame with cable ties and Phillips screws.
Each screw secures a clamp on the frame that holds the cable in place.
4. Connect the key switch cable connector to the adapter-cable connector near the
rear of the power sequencer (
FIGURE 5-1
).
5. Power on the expansion cabinet.
See Chapter 3.
Key switch
Metal clip
