2-4
Sun StorEdge Expansion Cabinet Installation and Service Manual • July 2000
3. Check the electrical ratings label on the serial number label attached to the power
sequencer. Verify that the stated rating matches the AC input voltage to the
system (
TABLE 2-1
and
TABLE 2-2
).
4. Connect the female end of each AC power cord to the power sequencer connectors
(
FIGURE 2-4
).
Flip the cover latch open to access the connectors.
TABLE 2-1
Voltage Requirements for Maximum Operating Voltage
and Frequency Ranges
AC voltage rating
200 to 240 VAC
AC voltage range
180 to 264 VAC
Frequency range
47 to 63 Hz
TABLE 2-2
Current Requirements at Nominal Line Voltage
for a Cabinet in Maximum Configuration
Nominal AC input voltage rating single phase
200 to 240 VAC
Maximum current requirement
24A at 240 VAC
Maximum current per power sequencer outlet
10A
