4-4
Sun StorEdge Expansion Cabinet Installation and Service Manual • July 2000
6. Install the device.
Refer to the online Rackmount Placement Matrix and the documentation that came
with your device.
7. Route the SCSI or fiber optic cables from the device to the host system(s).
Refer to the documentation that came with your device.
8. Route the power cables from the device to the power sequencer(s).
An expansion cabinet that is ordered without any devices installed has the power
cables routed as shown in
FIGURE 4-2
.
FIGURE 4-2
Power Cable Routing
Caution –
Power cable routing can vary depending on how the expansion cabinet is
configured in the factory (for instance, the power cabling in a StorEdge A3500 1x8
expansion cabinet is different than that in a expansion cabinet configured with
StorEdge A5000 disk arrays). Refer to the documentation that shipped with your
device.
R1&R2
R3
R6
R4
R9&11
R8&R10
R5
R7
L1&L2
L3
L6
L4
L9&L11
L8&L10
L5
L7
L8
L7
L4
L3
L2
L1
L6
L5
L9
R8
R7
R4
R3
R2
R1
R6
R5
R9
Rear view
L11
L10
R11
R10
Front
sequencer
Rear
sequencer