Subaru Legacy Outback 2008, Руководство пользователя

Страница: 178 / 471

Black plate (181,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
&
Headlight flasher
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works
even though the lighting switch is in the
“
OFF
”
position.
When the headlights are on high beam,
the high beam indicator light
“ ”
on the
instrument panel also comes on.
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
Turn signal lever
To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The turn signal
indicator lights will flash in the direction of
the turn or lane change. The lever will
return automatically to the neutral position
when you release it.
Illumination brightness con-
trol
The brightness of clock display, audio, air
conditioner, information display and instru-
ment panel illumination dims when the
light switch is in the
“ ”
or
“ ”
positions. You can adjust brightness of
the instrument panel illumination for better
visibility.
In turbo models and 3.0-liter models
(except OUTBACK), you can also adjust
the brightness of the instrument panel
illumination when the lighting switch is in
the OFF position.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
Instruments and controls
3-51
–
CONTINUED
–
3