Subaru Legacy Outback 2008, Руководство пользователя

Страница: 33 / 471

Black plate (34,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
1-8
Seat, seatbelt and SRS airbags
1. Slide the front seat forward as far as
possible.
2. Pull off the head restraint while press-
ing the release button.
3. Recline the seatback rearward up to
the lowest position. Remember to reinstall
the head restraint whenever the seatback
is raised back.
WARNING
.
Never drive your vehicle with the
seats converted in a flat bed
position. If you do so, occupants
will have a greater chance of
being injured even during simple
deceleration, acceleration and
cornering since no firm restraint
will be available for them.
.
Before you lie on the flat bed to
take a rest, carefully read the
“
Parking your vehicle
”
section
in chapter 7 and follow the in-
structions.
&
Active head restraint
The front seats of your vehicle are
equipped with active head restraints. They
tilt forward slightly in the event the vehicle
is struck from the rear, decreasing the
amount of rearward head movement and
thus reducing the risk of whiplash. For
maximum effectiveness, the head restraint
should be adjusted so that the center of
the head restraint is closest to the top of
the occupant
’
s ears.
CAUTION
.
Each active head restraint is
effective only when its height is
properly adjusted and the driver/
passenger sits in the correct
position on the seat.
.
If your vehicle is involved in a
rear-end collision, we recom-
mend that you have an author-
ized SUBARU dealer inspect the
active head restraints.
.
The active head restraints may
not operate in the event the
vehicle experiences only a slight
impact in the rear.
.
The active head restraints may be
damaged if they are pushed hard
from behind or subjected to
shock. As a result, they may not
function if the vehicle suffers a
rear impact.