Subaru Legacy Outback 2008, Руководство пользователя

Страница: 61 / 471

Black plate (62,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
1-36
Seat, seatbelt and SRS airbags
&
Booster cushion
1. Place the booster cushion in the
seating position and sit the child on it.
The child should sit well back on the
booster cushion.
2. Run the lap and shoulder belt through
or around the booster cushion and the
child following the instructions provided by
its manufacturer.
3. Insert the tongue plate into the buckle
until you hear a click. Take care not to
twist the seatbelt.
Make sure the shoulder belt is positioned
across the center of child
’
s shoulder and
that the lap belt is positioned as low as
possible on the child
’
s hips.
4. To remove the booster cushion, press
the release button on the seatbelt buckle
and allow the belt to retract.
WARNING
.
Never use a belt that is twisted or
reversed. In an accident, this can
increase the risk or severity of
injury to the child.
.
Never place the shoulder belt
under the child
’
s arm or behind
the child
’
s back. If an accident
occurs, this can increase the risk
or severity of injury to the child.
.
The seatbelt should fit snugly in
order to provide full restraint.
Loose fitting belts are not as
effective in preventing or redu-
cing injury.
.
Place the lap belt as low as
possible on the child
’
s hips.
High-positioned lap belt will in-
crease the risk of sliding under
the lap belt and of the lap belt
sliding up over the abdomen, and
both can result in serious inter-
nal injury or death.
.
Make sure the shoulder belt is
positioned across the center of
child
’
s shoulder. Placing the
shoulder belt over the neck may
result in neck injury during sud-
den braking or in a collision.
&
ISOFIX anchor bars