Subaru Legacy Outback 2008, Руководство пользователя

Страница: 48 / 471

Black plate (49,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
1. Insert a key or other hard pointed
object into the slot in the connector
(buckle) on the right-hand side and push
it in, and the connector (tongue) plate will
disconnect from the buckle.
2. Allow the retractor to roll up the belt.
You should hold the webbing end and
guide it back into the retractor while it is
rolling up. Neatly store the tongue plates
in the recess in the retractor and then
insert the connector (tongue) plate into the
slot located at the front of the recess.
CAUTION
.
Do not allow the retractor to roll
up the seatbelt too quickly.
Otherwise, the metal connector
(tongue) plates may hit against
the trim, resulting in damaged
trim.
.
Have the seatbelt fully rolled up
so that the connector (tongue)
plates are neatly stored. A hang-
ing connector (tongue) plate can
swing and hit against the trim
during driving, causing damage
to the trim.
&
Seatbelt maintenance
To clean the seatbelts, use a mild soap
and lukewarm water. Never bleach or dye
the belts because this could seriously
affect their strength.
Inspect the seatbelts and attachments
including the webbing and all hardware
periodically for cracks, cuts, gashes,
tears, damage, loose bolts or worn areas.
Replace the seatbelts even if only minor
damage is found.
CAUTION
.
Keep the belts free of polishes,
oils, chemicals and particularly
battery acid.
.
Never attempt to make modifica-
tions or changes that will prevent
the seatbelt from operating prop-
erly.
Seat, seatbelt and SRS airbags
1-23
1