Black plate (444,1)
一
般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
11-66
Maintenance and service
4. Remove the bulb holder from the rear
combination light assembly by turning it
counterclockwise.
5. Pull the bulb out of the bulb holder and
replace it with a new one.
6. Set the bulb holder into the rear
combination light assembly and turn it
clockwise until it locks.
7. Insert the harness into the holder.
8. Reinstall the rear combination light
assembly by sliding the two-pronged part
of the combination light assembly securely
to each holder of the vehicle side.
9. Reinstall the side cover.
&
Back-up light (Station wagon)
1. Use a flat-head screwdriver to remove
the light cover from the rear gate trim.
2. Turn the bulb socket counterclockwise
and remove it.
3. Pull the bulb out of the bulb socket and
replace it with a new one.
4. Install the bulb socket by turning it
clockwise. Install the light cover on the
Содержание Legacy Outback 2008
