Subaru Legacy Outback 2008, Руководство пользователя

Страница: 288 / 471

Black plate (295,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
to the floor and hold that position. The
transmission will automatically downshift
to 3rd, 2nd or 1st gear. When you release
the pedal, the transmission will return to
the original gear position.
To use the
“
SPORT
”
mode, move the lever
from this position into the manual gate.
To use the manual mode, move the lever
from this position into the manual gate
then move it toward the
“
M+
”
and
“
M
− ”
ends.
!
While climbing a grade
When driving up a hill, undesired upshift to
4th gear is prevented from taking place
when the accelerator is released. This
minimizes the chance of subsequent
downshifting to a lower gear when accel-
erating again. This prevents repeated
upshifting and downshifting resulting in a
smoother operation of the vehicle.
NOTE
The transmission may downshift to 2nd
or 1st gear, depending on the way the
accelerator pedal is pressed to accel-
erate the vehicle again.
!
While going down a hill
When you are descending a hill or any
other slope while braking with the
“
SPORT
”
mode selected, the transmission
may downshift to 3rd or 2nd gear depend-
ing on how hard you depress the brake
pedal, causing engine braking to work.
Reacceleration for a short time will cause
the transmission to upshift normally.
NOTE
.
A 4th-to-3rd automatic downshift
will not occur at speeds above 80
km/h (50 mph) and a 3rd-to-2nd auto-
matic downshift will not occur at
speeds above 38 km/h (24 mph).
.
Automatic downshifts to 3rd or 2nd
may occur even when driving on a level
road depending on conditions, such as
how hard you depress the brake pedal.
&
Selector lever reverse inhi-
biting function
This function prevents accidental move-
ment of the selector lever to the
“
R
”
position while the vehicle is moving.
The function becomes operational when
the vehicle reaches a speed of approxi-
mately 10 km/h (6 mph). Once opera-
tional, it prevents the selector lever from
being moved from the
“
N
”
position to the
“
R
”
position. When the vehicle speed
drops below 10 km/h (6 mph), the function
is canceled. The selector lever can then
be moved to the
“
R
”
and
“
P
”
positions.
When the ignition switch has been turned
to the
“
LOCK (off)
”
position, movement of
the selector lever from the
“
N
”
position to
the
“
R
”
position is possible for a limited
time period by depressing the brake pedal
and then becomes impossible. Also, the
selector lever cannot be moved to the
“
R
”
position after it has been placed in the
“
P
”
position and then placed again in the
“
N
”
position.
When the movement of the selector lever
from the
“
N
”
position to the
“
R
”
position
has become impossible, turn the ignition
switch back to the
“
ON
”
position and then
move the selector lever to the
“
P
”
position.
Pressing the selector lever release button
also makes it possible to move the
selector lever to the
“
P
”
position at this
time.
Starting and operating
7-27
–
CONTINUED
–
7