Subaru Legacy Outback 2008, Руководство пользователя

Страница: 378 / 471

Black plate (391,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
3. Release the secondary hood release
located under the front grille by moving the
lever toward the left.
Lift up the hood, release the hood prop
from its retainer and put the end of the
hood prop into the slot in the hood.
To close the hood:
1. Lift the hood slightly and remove the
hood prop from the slot in the hood and
return the prop to its retainer.
2. Lower the engine hood to a height
approximately 30 cm (12 in) above the
fully closed position and then let it drop.
3. After closing the hood, be sure the
hood is securely locked.
If this does not close the hood, release it
from a slightly higher position. Do not push
the hood forcibly to close it. It could
deform the metal.
WARNING
Always check that the hood is
properly locked before you start
driving. If it is not, it might fly open
while the vehicle is moving and
block your view, which may cause
an accident and serious bodily in-
jury.
Maintenance and service
11-13
11