Subaru Legacy Outback 2008, Руководство пользователя

Страница: 142 / 471

Black plate (145,1)
一 般
Model "A2440GE-A" EDITED: 2007/ 6/ 15
the trip meter was last reset.
When the vehicle speed is less than
approximately 9.5 km/h (6 mph), the
current fuel consumption is not displayed.
The displayed number with
“
A
”
is the
average fuel consumption corresponding
to the A trip meter indication, and the
displayed number with
“
B
”
is the average
fuel consumption corresponding to the B
trip meter indication.
Those A and B indications can be
changed by depressing the trip knob.
When either of the trip meter indications is
reset, the corresponding average fuel
consumption value is also reset.
NOTE
.
The indicated values vary in accor-
dance with changes in the vehicle
’
s
running conditions. Also, the indicated
values may differ slightly from the
actual values and should thus be
treated only as a guide.
.
When either trip meter indication is
reset, the average fuel consumption
corresponding to that trip meter indica-
tion is not shown until the vehicle has
subsequently covered a distance of 1
km (or 1 mile).
&
Outside temperature and
journey time
!
Outside temperature
1) Outside temperature
2) Journey time
The indicator shows the outside tempera-
ture in a range from
−
30 to 50
8
C (
−
22 to
122
8
F).
The indicator can give a false reading
under any of the following conditions:
.
When there is too much sun.
.
During idling; while running at low
speeds in a traffic jam; when the engine
is restarted immediately following a shut-
down.
.
When the actual outside temperature
falls outside the specified indicator range.
When the outside temperature is 3
8
C
(37
8
F) or lower, the display flashes
“
OUT
TEMP 3
8
C (37
8
F)
”
for 3 seconds and
gives a notice to the driver that the road
surface may be frozen. After 3 seconds, it
returns to its original indication of the
outside temperature and journey time.
If the outside temperature drops to 3
8
C
(37
8
F) or lower while the display is giving
an indication other than the outside
temperature, the display shows
“
OUT
TEMP 3
8
C (37
8
F)
”
for 3 seconds before
returning to its original indication.
If the display is already indicating an
outside temperature of 3
8
C (37
8
F) or lower
when the ignition switch is turned to the
“
ON
”
position, the display does not shows
“
OUT TEMP 3
8
C (37
8
F)
”
.
Instruments and controls
3-15
–
CONTINUED
–
3