Sturtevant Richmont 10469, Руководство по эксплуатации

Страница: 30 / 32

Page 28
FM Switch Wrench Communications
The FM Switch Wrench has on it a transceiver that has a unique identifier. This permits the sys-
tem to identify the transceiver, and hence the tool, with which it is to work.
The TCV-Ethernet unit can “learn” which tool it is to work with through either of two ways. The
tool can be learned through a programming function as previously addressed, but there is a
faster and simpler way in which to create the association between the unit and the tool.
1. Turn the power to the unit on.
2. Place the key in the keyed lock in the side of the unit.
3. Turn the key from the vertical locked position clockwise to the horizontal program posi-
tion.
4. Check that the STRENGTH/PROG LED illuminated.
5. Click the FM Switch Wrench to be used with this unit and hold it in the “clicked” position
for four seconds.
6. Turn the key back to the vertical locked position.
The FM Switch Wrench transmitter is now associated with that TCV-Ethernet unit.
Should the transmitter be damaged later in use, or if a different wrench with a different transmit-
ter is to be used, the process will have to be repeated with the new or repaired tool before the
TCV-Ethernet and Switch Wrench will work as a system.